Mastering the Depths: A Step-by-Step Guide to Diving Lake Defender, the Custom-Built Submarine

Diving a submarine may seem like an adventure out of a sci-fi novel, but for the creator of Lake Defender, it's a reality that took four years to build. This meticulously crafted vessel is not just a marvel of engineering but also a testament to the dedication and passion of its builder. Let's delve into the fascinating process of diving this incredible submarine.

First, powering up is crucial to ensure the CO2 scrubber is operational. The builder starts by turning on the power, indicated by a red light, which begins the countdown on the CO2 meter. Oxygen flow is then adjusted to approximately 400 milliliters per minute, an essential step for maintaining breathable air underwater.

Sealing the submarine is the next critical task. Every hatch must be thoroughly checked to ensure no light is peeking through, indicating potential leaks. Once all clamps are securely fastened, the submarine is sealed and ready for the dive.

Flooding the ballast tanks is where the real action begins. The front ballast tank is flooded first, followed by the main and aft tanks. As water fills these compartments, the submarine starts to submerge. The periscope becomes the guide, ensuring the vessel remains level with the hatches.

Once the hatches are level, the flooding is halted, and Lake Defender is officially underwater. This step-by-step process, demonstrated in first-person, showcases the intricate details and careful planning required to operate a custom-built submarine.

For those fascinated by underwater adventures and the engineering behind submarines, watching the full dive of Lake Defender is an absolute must. Dive into the detailed process and witness the marvel of this incredible creation.